You need to prepare the tools needed to disassemble the car sun visor, a flat screwdriver, a t-20 spline, and then open the door to prepare for the next disassembly process. Fold down the sun visor by hand, first disassemble the right side that is stuck in the hook, take out a flat-blade screwdriver, and use a flat-blade screwdriver to gently pry up the edge of the sun visor stuck in the hook. Be careful when prying. , to avoid prying off plastic hooks or sun visors.

After prying open the right side, turn the sun visor about 90 degrees clockwise by hand. At this time, you will see a small white cover on the left side of the sun visor. Pry it off, and put away the small cover for installation.


Blue Waterproof Car Sun Shade Cover


Packaging & Delivery

Selling Units:Multiple of 10

Package size per：43X38X69 cm

Gross weight per：26.000 kg

Package Type: Poly Bag

Material	PVC/PE/nylon	Feature	UV Protection.Sunshade Cover
Package	Pouch Bag ,Poly Bag ,Custom	Logo	Any printing,just send the design
Color	Any color can be customized	Port	Ningbo/Shanghai

Quantity(Pieces)	1 - 1000	>1000
Est. Time(days)	15	To be negotiated

Next, you will see a small screw inside, this screw is used to fix the sun visor, take out the t-20 spline, and use the t-20 spline to remove this screw.

After the screws are disassembled, hold the left side of the sun visor with the left hand, and the right side of the sun visor with the right hand, and then gently push down, mainly on the left side, so that the sun visor is separated from the big roof of the car. Slow down, be careful, and you'll be fine.

After the sun visor is separated, unplug the harness plug inside, so that the sun visor can be completely disassembled. It should be noted that this harness plug is very small, so when unplugging, it must be light to avoid The tiny wire harness is broken.